MILAN ACRYLIC DISTEMPER is an acrylic emulsion based distemper which gives durable, smooth, matt finish to the interior walls. A tested formulation of acrylic co-polymer binders used to give unmatched performance.
It is recommended for all types of interior surface like smooth cement plaster, False Ceiling, Asbestos sheet, concrete surface. Avoid surfaces with continuous dampness and seepages.
Method Of Application
MILAN Acrylic Distemper
Brush, Roller or Spray.
As per shade card
Smooth and Matt.
110-120 sq. ft per kg per coat.
1, 2, 5, 10 & 20 Kg Pack
2 years from manufacturing date if kept in original
air tight containers
away from sunlight.
New surface should be given enough time to mature. Make the surface smooth and uniform. Clean the surface from grease, loose or flaking particles. Apply a coat of PACIFIC Cement Primer (WIT).
Using an Emery Paper clean the surface free from all loose and powdery material and old paints film apply a coat of PACIFIC Cement Primer (WIT).
Apply 2-3 coats of DURABLE DISTEMPER thinned 700 ml by volume of potable water per kg. drying time 5-6 hours between the coats.
Stir Well and Strain before use. Please do not add any kind of chemical or thinner in distemper. Over dilution of MILAN DISTEMPER may result in shade variation, poor hiding, poor bonding, or flaking. Excess brushing and stretching are also to be avoided.
Covering capacity of the paint will vary depending on substrate, surface preparation, method of application and other factors. The practical covering capacity will differ from the theoretical covering capacity. As precautions, an initial trail may be undertaken to determine covering capacity of very rough or abnormal surfaces.
An ISO 9001 : 2008 Certified co.
Contact Detail :
Plot No 1914, Phase IV,
Anand, Gujarat 388121